Dimerization of some substituted benzoic acids in aqueous solution from conductance measurements

Precision molar conductances of benzoic, o-toluic, 2,6-dimethylbenzoic, 2,3,6-trimethylbenzoic, and, o-fluorobenzoic acids have been determined in aqueous solution as a function of temperature and of concentration up to near saturation (<0.035 M). At the higher concentrations molar conductances are found to be less than anticipated for the simple dissociation of a 1-1 electrolyte. Although the deviations are only 1% or less they have been interpreted to show that these acids are dimerized in solution. The interpretation includes an assumption that the dimer ionizes to produce a triple ion. Increasing numbers of methyl groups lead to increasing dimerization. For those acids with two ortho groups the dimerization increases with increasing temperature while the other three show decreasing dimerization with increasing temperature. Temperature functions have been determined for the dimerization constants and from these functions standard changes in enthalpy, entropy, and heat capacity have been determined. Comparisons are made with dimerization studies in non-aqueous solvents. From these as well as the behavior of benzene in water it is concluded that a major factor driving the dimerization is hydrophobic interaction. To provide a limiting conductance of the triple ion needed in the dimerization calculations a conductance study was also made for o-Phenylbenzoic acid on the assumption that its anion provides an approximate model of the triple ion.     

A calorimetric study of phase evolution in a WE43 Mg alloy

A DSC investigation has been performed on a Mg–RE–Y–Zr (RE=rare earth) technical alloy WE43. Hardness trend during isothermal treatments has been correlated to the calorimetric traces evolution and to the forming β phases with its precursors. Oversaturation of solute elements occurs at temperatures higher than 150±C, on cooling at room temperature after the anneals. Activation energies, found under non-isothermal conditions on artificially aged samples, suggest a slow transformation velocity, while the hardness response is relatively fast.     

Schiff碱配合物的研究：Ⅶ.硅胶表面Schiff碱的配位作用

有机高分子Schiff碱对金属离子的螯合作用已引起人们的兴趣。硅胶为无定形高比表面无机高分子,通过氯甲基化,可进行多种化学反应而形成各种表面基团。本文报道四种新型硅胶表面Schiff碱(图1),考察了它们对Cu~(2 ),Co~(2 ),Cd~(2 )和Pb~(2 )的配位作用。     

Microheterogeneity in aqueous-organic solutions: Heat capacities,volumes and expansibilities of some alcohols,aminoalcohol and tertiary amines in water

The heat capacities per unit volume and the densities of aqueous solutions of 2-propanol, neopentanol, tert-amylalcohol, 2-amino-2-methylpropanol, triethylamine and diethylmethylamine were measured, in many cases as a function of temperature, over the whole mole fraction or solubility range. Apparent and partial molal heat capacities, volumes and expansibilities were derived. The concentration dependence of these functions suggest the existence of transitions in some of these systems, in the water-rich region, qualitatively similar to micellization. The large relaxation contribution observed with some of the thermodynamic functions of hydrophobic alcohols and amines suggests a reinforcement of hydrophobic hydration due to strong hydrogen-bonding interactions of the polar groups with water.     

Thermodynamic properties of organic compounds in aqueous solution. II. Apparent molal heat capacities of piperidines,morpholines, and piperazines

Apparent molal heat capacities of some piperidine, morpholine, and piperazine derivatives in aqueous solution have been determined by adiabatic calorimetry in the temperature range 20–55°C and in the molality range 0.2–1m. Comparison of experimental values with those calculated through group contributions, found for monofunctional compounds, indicates strong interactions between the hydrophilic centers. An interpretation is given of the possible mechanism of this interaction. Also, values of ΔC _p for the addition reaction of proton to nitrogen centers of mono- and bifunctional organic compounds are examined.     

配合物Zn(Phe)(NO3)2·H2O(s)的低温热容和标准摩尔生成焓

利用精密自动绝热热量计直接测定了配合物Zn(Phe)(NO3)2·H2O(s) (Phe:苯丙氨酸)在78-370 K温区的摩尔热容. 通过热容曲线的解析得到该配合物的起始脱水温度为, T0=(324.27±0.37) K. 将该温区的摩尔热容实验值用最小二乘法拟合得到摩尔热容(Cp, m)对温度(T)的多项式方程, 并且在此基础上计算出了它的舒平热容值和各种热力学函数值. 依据Hess定律, 通过设计热化学循环, 选择体积为100 mL浓度为2 mol·L-1 的盐酸作为量热溶剂, 利用等温环境溶解-反应热量计分别测定混合物{ZnSO4·7H2O(s)+2NaNO3(s)+L-Phe(s)}和{Zn(Phe)(NO3)2·H2O(s)+Na2SO4(s)}的溶解焓为, ⊿dH0m,1 =(69.42±0.05) kJ·mol-1, ⊿dH0 m,2 =(48.14±0.04) kJ·mol-1, 进而计算出该配合物的标准摩尔生成焓为, ⊿fH0m =-(1363.10±3.52) kJ·mol-1. 另外, 利用紫外-可见(UV-Vis)光谱和折光指数(refractiveindex)的测量结果检验了所设计的热化学循环的可靠性.     

胺固化环氧酚醛树脂对Hg~(2+)的吸附性能

螯合树脂能与金属离子形成稳定的配合物,在无机、冶金、分析药物、催化、海洋化学、放射化学、环境保护各领域都有非常重要的应用[1-3]。我们曾以酚醛树脂为大分子骨架与多胺反应制备了一系列螯合树脂并对其结构及对多种金属离子的吸附性能进行了探讨[4,5]。本文则以线型环氧酚醛树脂为大分子骨架、多乙烯多胺为固化剂,制备了五种不同氮含量的氨基环氧酚醛螯合树脂,并考察其对金属离子Ｈｇ2+的吸附性能。1　实验部分1.1　仪器与试剂ＮｉｃｏｌｅｔＭＡＧＮＡ ＩＲ550(ＳｅｒｉｅｓＩＩ)红外分光光度计,ＳＨＡ-Ｃ水浴恒温振荡器,ＰＥ2000…     

锂离子电池正极材料LixNi1／3Mn1／3及电化学性能研究CO1／3O2的合成及电化学性能研究

应用以氢氧化物共沉淀为前驱体的高温固相烧结法合成LiNi1/3Mn1/3Co1/3O2正极材料，研究了沉淀温度及烧结过程锂盐投入量对该材料的结构和电化学性能的影响．结果表明，以室温（-20℃）下合成的氢氧化物为前驱体制备的LiNi1/3Mn1/3Co1/3O2具有较好的电化学性能．高温固相烧结会导致部分LiOH损失，因而在合成过程中需加入过量的氢氧化锂，实验表明Li1.08Ni1/3Mn1/3Co1/3O2材料的电化学性能最优．